With the patented dry®, interseal has developed a technically and . 8 x 8 x microns ( mils) dry equivalent to. microns ( mils) wet . Interseal Interthane SYSTEMS. COMPATIBILITY. Sep 22 , , SYNTHETIC ENAMEL PAINT, INTERSEAL HSALUMINIUM PART A EGA/20LT, Sri Lanka, Bangalore, LTR, , 35,,
|Published (Last):||11 January 2008|
|PDF File Size:||1.43 Mb|
|ePub File Size:||8.38 Mb|
|Price:||Free* [*Free Regsitration Required]|
However, if necessary, application over prefabrication blast primers can be performed. Mouse over image to zoom. Intercure HS is suitable for application to blast cleaned surfaces which were initially to the above standard but have been allowed to deteriorate under good shop conditions for up to days. Over-application should be avoided as thick films will not be as good a substrate for topcoat adhesion after ageing as those at the specified thickness.
GTA Do not thin more than allowed by local environmental legislation Mix ratio: Systems compatibility Intercure HS will unterseal be applied to suitably prepared steel, e.
Over-application of Intercure HS will extend intrrseal the minimum overcoating periods and handling times, and may be detrimental to long term overcoating properties. Dry time 1 Hours 1 26 Hours 1 48 Hours 1 8 Hours 1. Available in colours as well as aluminium and glass flake versions with passivator, to provide additional anti-corrosive barrier protection.
The surface may deteriorate to Sa2 standard but must be free from loose powdery deposits. Intercure HS can also be used as a primer for substrates other than blasted steel, e. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units. Product Line Interseal 6. It is good working practice to periodically flush out spray equipment during the course of the working day.
Interseal | Protective – Coatings – AkzoNobel
Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. Be the first to write a review for this product!
VOC values are typical and are provided for guidance purpose only. Interseal HS is suitable for application to a wide range of substrates and aged coatings. Warning Intercure HS is preferred for use with systems for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions. At low temperatures, it may be necessary to thin Intercure HS 2111 enable airless apray application to be performed.
Absolute measured adhesion of topcoats to aged Intercure HS is less than that to fresh material, however, it is adequate for the specified end use. Number of Components Multi pack 4 Single Pack 2.
INTERCURE 200HS – PART B – 3.79L
The use of alternative thinners, particularly those containing ketones, can severely inhibit the curing mechanism of the coating. This product must only be thinned using recommended International GTA thinners. Always mix a complete unit in the proportions supplied. Low molecular weight reactive additives, which will form part of the film during normal ambient cure conditions, will also effect VOC values determined using EPA Method Intercure HS is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.
Varnish Hybrid Water base. A high solids, low VOC, two component, high build, surface tolerant epoxy coating, Interseal HS provides excellent anticorrosive protection in industrial inetrseal offshore environments in both atmospheric exposure and immersion service. Suitable for overcoating within 7 hours in most climatic conditions hence speeding up production and throughput in fabrication shops.
Provides quick cure even at low temperatures often encountered in maintenance painting. If oxidation has occurred between blasting and application of Intercure HS the surface should be reblasted to the specified visual standard. Consult International Niterseal Coatings for further details.
Product Type Primer Chemistry Epoxy.
Export Data and Price of paint interseal hs from Bangalore | Zauba
However, 121 phenomena are not detrimental to anti-corrosive performance. Low Temperature Curing 24 Hours 1. Prior to paint application, all surfaces should be assessed and treated in accordance with ISO Once the unit has been mixed, it must be used within the working pot life specified.
Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner.
Additionally, in common with all epoxies Intercure HS will chalk on exterior exposure. Excessive over application of material on areas such as poorly prepared welds may result in long term stress cracking and so early failure.
A single imterseal, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates.
Surface preparation All surfaces to be coated should be clean, dry and free from contamination. Press and move to zoom. This product is not available in pale and pastel shades due to interdeal tendency to discolour rapidly. Zinc Phosphate version also available. Work stoppages Do not allow material to remain in hoses, gun or spray equipment.
If the shop primer shows extensive or widely scattered breakdown overall sweep blasting maybe necessary. These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.
A two component, low VOC, high solids epoxy, 2111 with aluminium to provide enhanced corrosion resistance. Interseal dries to form a non-tacky, tough, resilient temporary protective layer. A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. As a primer for inteeseal intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges.