Guide of Genex Probe forLTE Drive Test Huawei confidential, LTE Drive Test Using GENEX Probe V3 5 Tutorial. Probe The Genex Probe and Genex Assistant for drive tests are part of the Genex series. . LTE Drive Test Using GENEX Probe V Tutorial. Uploaded by. Lte drivetest guideline with genex probe. 1. Consulting| Training| Research LTE DT Theory, Tools and Preparation • Its Time to Work smart not.
|Published (Last):||19 February 2004|
|PDF File Size:||5.8 Mb|
|ePub File Size:||3.77 Mb|
|Price:||Free* [*Free Regsitration Required]|
The system gives a prompt, saying “Please install the maps plug-in”.
Table Conditions in the specified base station measurement Name Description Measurement Indicates the gutorial period. The Map Layers pane is displayed on Layer bar the right of the Map window.
Figure Test Plan dialog box 2 Choose the device for the test plan from the Device Select drop-down list, as shown in Figure The operation of this window is the same as that of the RRC Messages window.
Introduction to GENEX Probe
Set such test plans as calling test, FTP sending or loading, or concurrent service tests. Huawei recommends connecting proeb UE and configuration port one by one to avoid any mismatch.
Re-connect to the UE.
To stop a playback. The effective range should be within the best finger and the best finger — rake threshold. To adjust the play progress Note: To adjust the play rate Note: To distinguish scrambling codes by color, perform the following steps: The LOG data that conforms to certain constrains can be combined together.
All other trademarks and trade names mentioned in this document are the property of their respective genexx. The function takes effect only when the system records the logfile at the beginning of the drive test and the test mode is in use.
Measure parameter filtering In case of GSM service test, select it to report the associated parameters. The ManualConfig window is displayed, as shown in Figure Rename a tab The Rename Page dialog box is displayed, as shown in Figure The captured window is saved in a.
Guide to Perform Initial DT With GENEX Probe – PDF Free Download
The system renames the device automatically. Ranges from 0 dB to 20 dB. This part is the essential for the test preparation, and should be attached with enough attention.
Reason When data exceptions occur, you need to check the parameters in the window. To check the entire map of the layer. Test plan will be stopped automatically once all items are executed.
Conditions The Conditions lists the conditions for the test items in the specified base station measurement. The properties are as follows: Five records are the maximum. Table A-1 Antenna parameter Max. Indicates the HTTP serving port.
Guide to Perform Initial DT With GENEX Probe
Data Configuration Figure shows the data items in the multi-UE multi-technology comparative test. Set Log mask Test Plan Configuration. Huawei recommends that you select some vital options.
The hardware must be configured before the system configuration.